| parameter | |
|---|---|
| BEMS/TempUitbl | Average discharge temperature units |
| BEMS/TBuiten | actual outside temperature. |
| BEMS/TbFilt | used outside temperature in control This is time based filtered temperature of TBuiten |
| BEMS/TestMode | Testmode active 0=not active 1=testmode active |
| BEMS/ErrFlags | see Error code |
| BEMS/RealHeat | |
| BEMS/DoorRatio | Percentage door open. Used for fan speed control Auto mode. (menu 60 must be set to 8 for DM) At night the value must be 0 (door closed) during the day it can vary between 0-100. This could also be used as a check for good installation of the shop. |
| BEMS/Inp1Cnt | total count of input changes. |
| BEMS/ErrFlags2 | see Error code |
| BEMS/Person | number of people movement detected by a PIR-sensor inside the unit. (PIR sensor could also be used as an alternative for the door switch then Door ratio will be based on the number of person counts) |