Pinto-Plus
Daten
-
USB-Host + USB-OTG über JST-Wannenstecker (RM 2.0 mm)
Bohrungen für Mikrokopter Platinen
SPI-Port mit VCC und GND
SIO-1 und SIO-3 mit GND
ONE-Wire mit GND und VCC (3-PIN)
3.3V und 5V DC-DC Regler auf der Platine
alle analog-Ports mit GND herausgeführt
alle Audio/Micro Pins herausgeführt
>20 GPIO-Pins
4x I2C (mit Bustreiber)
zwei Layer
alle PIN's RM 2.0mm
PINS
| OTG-Override |
| USBOTG_ID | GND |
| SPI |
| GND |
| GPIO114_SPI1_NIRQ |
| GPIO171_SPI1_CLK |
| GPIO173_SPI1_MISO |
| GPIO172_SPI1_MOSI |
| GPIO175_SPI1_CS1 |
| GPIO174_SPI1_CS0 |
| +5V |
| Wakeup |
| GPIO31_WAKEUP | +3V3 |
| PWM[0..5] |
| GPIO144_GPT9_PWM | GND |
| GPIO147_GPT8_PWM | GND |
| GPIO146_GPT11_PWM | GND |
| GPIO145_GPT10_PWM | GND |
| PWM1 | GND |
| PWM0 | GND |
| USB-Host / USB-OTG |
| +5V | D- | D+ | GND |
| MMC3 |
| GND | GPIO19_D1 | GPIO23_DAT5 | GPIO12_CLK | GPIO21_DAT7 | GPIO14_DAT4 | GPIO18_D0 |
| +5V | GPIO17_D3 | GIOP22_DAT6 | GPIO20_D2 | 4030GP2_N_CD | GPIO150_WP | CPIO13_CMD |
| IO0 |
| +5V | GPIO72_L_DD02 | GPIO73_L_DD03 | GPIO77_L_DD07 | GPIO71_L_DD01 |
| GND | GPIO74_L_DD04 | GPIO75_L_DD05 | GPIO70_L_DD00 | GPIO76_L_DD06 |
| IO2 |
| GPIO83_L_DD13 | GPIO90_L_DD20 | GPIO91_L_DD21 | GPIO82_L_DD12 |
| GPIO93_L_DD23 | GPIO92_L_DD22 | GPIO80_L_DD10 | GPIO81_L_DD11 |
| |
| GPIO85_L_DD15 | GPIO87_L_DD17 | GPIO88_L_DD18 | GPIO89_L_DD19 |
| GPIO86_L_DD16 | GPIO84_L_DD14 | GPIO79_L_DD09 | GPIO78_L_DD08 |
| 1 Wire |
| GPIO170_HDQ_1WIRE | GND | VCC |
Repository
svn://ed-solutions.de/e-design/pub/gumstix/PINTO-plus
Software
Bilder
